NaviBoss NaviBoss

STRAIT · FOR OFFICERS, MASTERS AND CHARTERERS

The Great Belt

The Great Belt between Zealand and Funen is the deep-water way into the Baltic Sea.

Position55°20.6′N 011°02.6′Eapproximate, the route's crossing
NAVAREAInavigational warnings area
Typestraitopen passage

Zones here

At the Great Belt: Baltic SOx+NOx ECA (Emission Control Area), Baltic Sea Area (PSSA) (Particularly Sensitive Sea Area) and Baltic Sea (MARPOL Special Area) (MARPOL Special Area).

See the piracy map and the ECA guide.

Navigational warnings

The Great Belt is in NAVAREA I. Keep its in-force warnings, and check the local notices and the vessel traffic service before the transit.

Questions about the Great Belt

Where is the Great Belt?

The Great Belt between Zealand and Funen is the deep-water way into the Baltic Sea. NaviBoss places it at about 55°20.6′N 011°02.6′E, in NAVAREA I.

Is the Great Belt in a piracy or war-risk area?

Not as of the date on this page: it lies in no ITF/IBF warlike area, JWC listed area or piracy hotspot that NaviBoss draws.

Other canals and straits

Avoid it on your own voyage

In the planner, tap the padlock on the Great Belt (or any of 950 passages) and the route is re-planned the other way, with the extra miles shown. Free with an account.

Open the route planner →

About our guides

NaviBoss guides are written and checked by maritime industry experts, masters and deck officers. Each one is built from the same data the planner uses, dated, and rebuilt when that data changes. Spotted something wrong? Tell us on the feedback board.

A planning aid, not for navigation. Check official charts and publications, the latest notices and your company's instructions before you rely on any figure here.