NaviBoss NaviBoss

SEA DISTANCE · FOR OFFICERS, MASTERS AND CHARTERERS

Richards Bay to Rotterdam by sea

The sea distance from Richards Bay to Rotterdam is 7,116 nautical miles via the Cape of Good Hope, about 21 days at 14 knots. The straight line across the globe is only 5,075 nm, but ships cannot sail over land.

7,116 nmvia the Cape of Good Hope · 13,178 km
21 daysat 14 knots, sea time
Richards BayRotterdam
The route NaviBoss plans, pilot station to pilot station. A planning sketch, not a chart.

Days at sea

Time under way only: add port, canal and anchorage time to plan the ETA.

SpeedDays at sea
10 knots30
12 knots25
14 knots21
16 knots19
20 knots15

Canals and straits on the way

In the order the ship meets them: Cape of Good Hope → Strait of Dover.

Zones on the route

Miles of this voyage inside each area, measured on the planned route.

AreaTypeMiles inside
North Sea SOx+NOx ECAEmission Control Area393 nm
MDAT-GoG Voluntary Reporting AreaVoluntary reporting area1,278 nm
Southern South African waters (MARPOL Special Area)MARPOL Special Area565 nm
NW European waters (MARPOL Special Area)MARPOL Special Area443 nm
North Sea (MARPOL Annex V Special Area)MARPOL Special Area393 nm

Emission Control Areas: the ECA guide. Piracy and war-risk areas: the piracy map.

Questions about Richards Bay to Rotterdam

How far is Richards Bay from Rotterdam by sea?

7,116 nautical miles (13,178 km) via the Cape of Good Hope, pilot station to pilot station, on real shipping lanes. The straight line across the globe is 5,075 nm, but a ship cannot sail over land, so the sea route is 40% longer.

How many days does a ship take from Richards Bay to Rotterdam?

About 25 days at 12 knots, 21 days at 14 knots or 15 days at 20 knots. That is time at sea only, with no port, canal or anchorage waiting.

Which canals and straits are on the route from Richards Bay to Rotterdam?

In order: Cape of Good Hope and Strait of Dover.

How many miles of the voyage are inside Emission Control Areas?

393 nm, in North Sea SOx+NOx ECA. Inside an ECA the fuel must carry no more than 0.10% sulphur, unless the ship uses an approved alternative such as a scrubber.

Does the route from Richards Bay to Rotterdam pass through piracy or war-risk areas?

Not on this route as of the date on this page: it crosses no ITF/IBF warlike area, JWC listed area or piracy hotspot that NaviBoss draws.

Which NAVAREAs does the voyage pass through?

NAVAREA VII, NAVAREA II and NAVAREA I. Keep the in-force navigational warnings of each.

How this distance is worked out

NaviBoss routes on a network of professional shipping lanes that keeps right through traffic separation schemes. The distance runs from the pilot boarding place at Richards Bay (Richards Bay) to the one at Rotterdam (Maas Center Buoy (Maascenter)), the same figure the planner gives for the two ports. Distances are great-circle nautical miles along that network. Seasonal Arctic routes are left out.

The same voyage the other way, Rotterdam to Richards Bay, is the same distance.

More sea distances

Plan it with your own ship

Open the planner, pick Richards Bay and Rotterdam, set your speed and departure: you get the ETA, every waypoint and the route file for your ECDIS. Free with an account.

Plan this voyage →

About our guides

NaviBoss guides are written and checked by maritime industry experts, masters and deck officers. Each one is built from the same data the planner uses, dated, and rebuilt when that data changes. Spotted something wrong? Tell us on the feedback board.

A planning aid, not for navigation. Check official charts and publications, the latest notices and your company's instructions before you rely on any figure here.