Guide NaviBoss help

How to check a port before arrival: pilot, local time, load line, draught

Where the pilot boards, the local time, the load line zone and the deepest draught at each terminal.

Start the tour in NaviBossIt walks you through this in the planner, step by step, on your own route.

The Ports tool has a card for each port: where the pilot boards, the local time, the load line zone, the water density and the terminals with their draughts.

#Steps

  1. Open Ports

    Press Ports in the rail.

  2. Search the port

    Type its name or UN/LOCODE in the search box.

  3. Open its card

    Press the port in the list. Its card opens on the chart.

  4. Pilot boarding

    The Pilot tab has the boarding position and the instructions.

  5. Terminals and draughts

    The Terminals tab lists each terminal with its draught, deepest first.

A port cardA port card
The port card: pilot, local time, load line and more.
The terminals with their draughtsThe terminals with their draughts
Each terminal with its draught, deepest first.

About our guides

NaviBoss guides are written and checked by maritime industry experts, masters and deck officers. Each one is built from the same data the planner uses, dated, and rebuilt when that data changes. Spotted something wrong? Tell us on the feedback board.

A planning aid, not for navigation. Check official charts and publications, the latest notices and your company's instructions before you rely on any figure here.

Free Ready when you are

Do it on your own voyage

Free account, no card. The tour walks you through it in the planner.

Start the tour

Free account · no card