Guide NaviBoss help

How to set up the chart for a bridge briefing

Choose the layers, pin the ones you need on every tool, and measure distances and ranges with Line and VRM.

Start the tour in NaviBossIt walks you through this in the planner, step by step, on your own route.

For a briefing on the bridge or in the office, put on the chart what you want to talk about, keep it there, and measure as you go.

#Steps

  1. Open Layers

    Press Layers at the bottom right of the chart.

  2. Choose the layers

    Open a group, for example Piracy & security, and press its tiles.

  3. Pin it

    The pin beside a group's switch keeps it on the chart whatever tool is open.

  4. Measure with Line

    Press Line under zoom, click points on the chart, then Finish.

  5. Set a VRM

    Press VRM, click the centre, then the range.

The Layers cardThe Layers card
Every layer, grouped by tool.
Loop
Line: click point after point.

About our guides

NaviBoss guides are written and checked by maritime industry experts, masters and deck officers. Each one is built from the same data the planner uses, dated, and rebuilt when that data changes. Spotted something wrong? Tell us on the feedback board.

A planning aid, not for navigation. Check official charts and publications, the latest notices and your company's instructions before you rely on any figure here.

Free Ready when you are

Do it on your own voyage

Free account, no card. The tour walks you through it in the planner.

Start the tour

Free account · no card